Turn-system

Clips and accompanying caps ensure any height differences between tiles are leveled.

1. Follow the steps below to achieve optimal results.
2. Slide the clips under the tile
3. Screw the cap on the clip
4. Twist the cap until it’s fully secure
5. Remove the clip
6. Unscrew the cap from the broken clip

Tile leveling systems offer a number of benefits. You can lay all your tiles in one go, for example, and start walking on your new floor sooner. The clips and wedges also hold the tiles together properly while laying them, and automatically ensure you always have the same joint width.

Are your tiles thinner than 6 mm? No problem if you’re using a leveling system. You’re sure to end up with a perfectly laid floor which you can enjoy for many years. When considering your options, you’ll discover a tile leveling system with standard clips and wedges or splints, among others. You can use this system to lay tiles evenly, with the clips and wedges doing all the work for you.
The clips are available in various thicknesses, such as 1, 2, and 3 mm, and the placement pliers are made from plastic so they’re easy to handle when inserting the wedges firmly in the clips. You can of course also opt for metal pliers.

Our tile leveling systems are available for different tile thicknesses and joint widths.

These sets include everything you need to take full advantage of the Levelit system, and lay a perfectly level tiled floor yourself.

Our range of complete sets consists of the following clips and caps

• 200 clips – 200 caps

We also have clips and wedges for different joint widths:

• 1.5 mm joint width
• 2 mm joint width

In principle, the clips from the above kits are suitable for tiles that are 3-17 mm thick.