This complete set includes everything you need to get started with Levelit, and lay a perfectly level outdoor area yourself. Use our wedges, accompanying clips, and pliers to lay a perfectly level outdoor area in no time at all.
The Levelit – XL – Complete set – Wedges, clips and plastic plier (15-25mm tile thickness) are suitable for various tile thickness and joint widths.
Our range is available in packs of:
Our clips are also suitable for joint widths of:
The clips are suitable for tiles that are 15 – 25 mm thick.
These clips are available as a complete leveling set. These sets contain the same number of clips and wedges, so you can get started right away, and always have enough clips and caps.
How many caps and wedges do I need?
The number of spacer clips and wedges required depends on the size of the tiles. You can find the recommended quantities on the “Calculation Chart” tab.
Use the calculator app to work out how many clips you need according to the tile size and surface area to be tiled.
After applying the tile adhesive, the clips are slid under the tile. Depending on the size of the tile, place one or more clips per side. Tap the tile.
Place the next tile after installing spacers.
* Depending on tile size, it may be necessary to use multiple spacers on each side.
* For tiles of approximately 20 cm, the use of two spacers per side is recommended.
In any case, 1mm spacers are used for 1mm tile joints, 2mm for 2mm joints, and 3mm for 3mm joints.
Insert the wedges into the clips slid under the tiles by hand. Carefully insert the wedges into the clips without exceeding the breaking point.
Use the special push-on pliers to facilitate insertion.
After this fixation, allow a drying time of 24 hours!
Once the tile adhesive has fully cured, the visible part of the clip can be removed. This is done with a rubber mallet or with the shoe in the direction of the joint.
* If using instant adhesive, wait for the adhesive to do its job.
The number of leveling clips and wedges required depends on the size of the tiles. You can find the recommended quantities in the chart below.
Use the calculator app to work out how many clips you need according to the tile size and surface area to be tiled.
It’s available for Android and iOS from the app store!
The Levelit – XL – Complete set – Wedges, clips and plastic plier (15-25mm tile thickness) are suitable for various tile thickness and joint widths.
Our range is available in packs of:
Our clips are also suitable for joint widths of:
The clips are suitable for tiles that are 15 – 25 mm thick.
These clips are available as a complete leveling set. These sets contain the same number of clips and wedges, so you can get started right away, and always have enough clips and caps.
How many caps and wedges do I need?
The number of spacer clips and wedges required depends on the size of the tiles. You can find the recommended quantities on the “Calculation Chart” tab.
Use the calculator app to work out how many clips you need according to the tile size and surface area to be tiled.
After applying the tile adhesive, the clips are slid under the tile. Depending on the size of the tile, place one or more clips per side. Tap the tile.
Place the next tile after installing spacers.
* Depending on tile size, it may be necessary to use multiple spacers on each side.
* For tiles of approximately 20 cm, the use of two spacers per side is recommended.
In any case, 1mm spacers are used for 1mm tile joints, 2mm for 2mm joints, and 3mm for 3mm joints.
Insert the wedges into the clips slid under the tiles by hand. Carefully insert the wedges into the clips without exceeding the breaking point.
Use the special push-on pliers to facilitate insertion.
After this fixation, allow a drying time of 24 hours!
Once the tile adhesive has fully cured, the visible part of the clip can be removed. This is done with a rubber mallet or with the shoe in the direction of the joint.
* If using instant adhesive, wait for the adhesive to do its job.
The number of leveling clips and wedges required depends on the size of the tiles. You can find the recommended quantities in the chart below.
Use the calculator app to work out how many clips you need according to the tile size and surface area to be tiled.
It’s available for Android and iOS from the app store!
